Wire Mesh Demister Pads
Wire mesh demister pads and mist eliminators for gas-liquid separation.
Knitted wire mesh demister pads remove entrained liquid droplets from process gas streams in scrubbers, absorbers, distillation columns, separators, and knock-out drums. Supplied to specification across material grade, diameter, thickness, density, wire diameter, support grid, and construction. Standard and segmented configurations on quotation.
Benchmark Configuration
Benchmark configuration shown. All parameters quoted to buyer specification.
| Parameter | Standard | Range / Notes |
|---|---|---|
| Material | SS316 | SS304 · SS316L · other alloys on request |
| Shape | Circular | Circular or rectangular |
| Diameter | 600 mm | Up to 5,000 mm (segmented) |
| Thickness | 100 mm | 50–300 mm |
| Density | 144 kg/m³ | 80–240 kg/m³ |
| Wire Diameter | 0.27 mm | 0.15 mm (fine) available |
| Support Grid | SS316, included | With or without, to requirement |
| Construction | Single-piece | Single-piece or segmented |
Supply Range
Material grades
SS304 · SS316 · SS316L (standard); other alloys on request
Shape
Circular and rectangular
Construction
Single-piece up to standard handling sizes; segmented for larger diameters and access-restricted retrofits
Support grid
With or without grid, to requirement
Wire diameter
0.27 mm standard; 0.15 mm fine grade available
Construction Options
Single-piece — Preferred where access and handling allow. Lower cost, cleaner installation, faster site work.
Segmented — Used for larger diameters, retrofit jobs through limited manholes, or installations where on-site assembly is required. Segment count, geometry, and support arrangement confirmed at quotation stage.
Where These Are Installed
Equipment
Scrubbers · absorbers · distillation columns · vapour-liquid separators · knock-out drums
Industries
Refineries and petrochemicals · gas processing and LNG · fertilizer and ammonia · pharmaceutical and specialty chemical · power generation · OEM fabrication and EPC
Documentation Included with Order
- EN 10204 3.1 Material Test Certificate
- Dimensional Inspection Report
- Certificate of Conformity
- Packing list with heat-number traceability
Documentation scope coordinated per order against buyer’s purchase order and any agreed inspection requirement. Mill MTCs are issued by the material manufacturer; Proxis issues Certificate of Conformity and inspection records under its own letterhead.
Have a specification ready?
Send material grade, dimensions, quantity, and any drawings — we will respond with a structured quotation.
Have a demister pad specification ready?
Send your specification, drawings, and quantity — we will respond with a structured quotation.